影响铁精矿K2O、Na2O、SiO2含量的因素分析

用统计分析方法 ,分析了影响精矿K2 O、Na2 O、SiO2 含量的因素 ,并根据分析结论提出了对生产工艺进行定向控制的条件     

鞍钢现有人造富矿产能及1600万t/a生铁规模的合理炉料结构的探讨

简要介绍了鞍钢现有人造富矿生产能力，分析了鞍钢生产1600万t／a生铁所需要的炉料数量、品种和质量，并提出了解决炉料缺口的方法和措施。     

井冈山水厂设计体会

阐述水厂设计中对水厂规模、水源地、净水厂位置及净水工艺的确定过程，根据原水的特点，通过分析对无阀滤池进行改良。     

矿石中金的快速测定

研究了活性炭纤维滤布富集分离的条件和解脱方法,并利用微波溶样、液珠萃取比色法测定矿石中的金。该方法的测定范围为(0.5~xx)×10-6,相对标准偏差RSD为3.2%,可用于矿石中金的野外快速测定。     

难处理金矿石加石灰焙烧焙砂中CaS的消除

介绍了用空气氧化预浸加石灰焙烧焙砂中的CaS，以消除其对金氰化的影响。预浸后金的氰化浸出率可从58％提高到80％以上。     

激光热源形成过程的定量描述

研究了热传导方程的通解，进而提出激光热源形成的微观机理和热源形成过程的三个理论计算式。对激光热效应的应用具有指导意义。     

一种辐射源距离的估算方法

提出利用测量设备与辐射源相对运动速度及测量设备所接收到的辐射功率的估算测量设备到辐射源距离的一种方法。对计算精度进行了分析，通过算例对理论分析进行了检验。     

鄂尔多斯盆地含油气系统

鄂尔多斯盆地含油气系统研究目前尚无成熟的划分方案和系统成果,本文主要依据油气赋存的层位并参考油气源将其划分为下古生界含气系统、上古生界含气系统及中生界含油气系统。各含油(气)系统平面分布范围主要受生油岩、储集岩分布和油气运移方向的控制;其中,下古生界含气系统、中生界含油气系统主要分布于盆地中部。上古生界含气系统主要分布于盆地北部。     

Waves generated by a source below a free surface in water of finite depth

The free-surface flow due to a submerged source in water of finite depth is considered. The fluid is assumed to be inviscid and incompressible. The problem is solved numerically by using a boundary integral equation formulation due to Hocking and Forbes [6]. The numerical results show that there is a train of waves on the free surface in accordance with the results of Mekias and Vanden-Broeck [5]. For small values of the Froude number, the amplitude of the waves is so small that the free surface is essentially flat in the far field. These waveless profiles agree with the calculations of Hocking and Forbes [6].     

RADIATION FIELD FROM A RECTANGULAR PLAQUE SOURCE FOR RADIATION PROCESSING

Evaluation of the Hubbell integral for an omnidirectional detector response to a rectangular plaque gamma emitting radiation source using a different numerical computation method on a personal computer was made. For a plaque consisting of several strip gamma emitters, exposure rates at different positions above the source were calculated using 'exact' evaluation and an approximate method. Optimization method is used to find source activity of each strip, so as to acquire desirable dose uniformity of the irradiated products. In uses of the Hubbell integral, by introducing appropriate programming, computation time can be saved.